lunchbox
Just Blaze Member
JUST BLAZE TEAM MEMBER
Posts: 72
|
Post by lunchbox on Aug 31, 2009 19:46:22 GMT -5
Greg is it possible to take the micro switch off of an Ion board and add about 4 inches of wire to it? If so how would i do it?  By tommyfischer at 2009-09-16 Ion tray, its going to hold the board, and maybe the reg. |
|
greg
Just Blaze Fan
OmGz A gUn Tek
Posts: 45
|
Post by greg on Aug 31, 2009 20:10:30 GMT -5
Yes very easy. Just heat up where the prongs go into the board with a soldering iorn, while pulling gentely on it with a pair of pliers. Once you get the switch off all you have to do is solder the wires inbetween the prongs on the back of the switch and where they used to go on the board. If you need further exlination let me known
|
|
lunchbox
Just Blaze Member
JUST BLAZE TEAM MEMBER
Posts: 72
|
Post by lunchbox on Aug 31, 2009 20:27:19 GMT -5
Thanks, you are the man...
|
|
greg
Just Blaze Fan
OmGz A gUn Tek
Posts: 45
|
Post by greg on Aug 31, 2009 23:58:57 GMT -5
Glad I got to help someone with my sweet new tech fourm
|
|
lunchbox
Just Blaze Member
JUST BLAZE TEAM MEMBER
Posts: 72
|
Post by lunchbox on Sept 4, 2009 20:51:28 GMT -5
this is pissing me off.... but i got the aluminum and cutters i need for the frame im going to make.
|
|
lunchbox
Just Blaze Member
JUST BLAZE TEAM MEMBER
Posts: 72
|
Post by lunchbox on Sept 4, 2009 20:57:29 GMT -5
I got it....
|
|
greg
Just Blaze Fan
OmGz A gUn Tek
Posts: 45
|
Post by greg on Sept 4, 2009 22:36:47 GMT -5
Sweet, what project is this for? I can't wait to see the final product
|
|
lunchbox
Just Blaze Member
JUST BLAZE TEAM MEMBER
Posts: 72
|
Post by lunchbox on Sept 5, 2009 20:02:12 GMT -5
You'll see.
|
|
lunchbox
Just Blaze Member
JUST BLAZE TEAM MEMBER
Posts: 72
|
Post by lunchbox on Sept 11, 2009 23:28:50 GMT -5
i lost the micro switch, got any at the store? And Ill get the solidworks drawing up next wednesday.
|
|
greg
Just Blaze Fan
OmGz A gUn Tek
Posts: 45
|
Post by greg on Sept 12, 2009 10:47:54 GMT -5
iI don't have an ion micro switch but I got one out of a PMR, its almost identical, I will give it to you when I get the DM3 from you.
|
|
lunchbox
Just Blaze Member
JUST BLAZE TEAM MEMBER
Posts: 72
|
Post by lunchbox on Sept 13, 2009 20:28:32 GMT -5
cool i got all but one part on the matrix done. ill have it ready for you saturday.
|
|
greg
Just Blaze Fan
OmGz A gUn Tek
Posts: 45
|
Post by greg on Sept 14, 2009 20:14:02 GMT -5
Sweet dude sounds good, its gonna be sick when its done. I still need to figure out how I want it lazered.
|
|
lunchbox
Just Blaze Member
JUST BLAZE TEAM MEMBER
Posts: 72
|
Post by lunchbox on Sept 14, 2009 21:15:02 GMT -5
Is it going to be a working gun? i got all but the top of the hyper 2 done.
|
|
greg
Just Blaze Fan
OmGz A gUn Tek
Posts: 45
|
Post by greg on Sept 16, 2009 12:07:46 GMT -5
It probably will be eventually. I got all the parts for it besides a noid, but I think I got the parts to build a noid. If it does work I doubt I will ever play with it, just cause from what I see its going to be the hottest gun ever and I don't want to mess it up. Also it is going to have some custom lazer engraving done once I get it back.
|
|
lunchbox
Just Blaze Member
JUST BLAZE TEAM MEMBER
Posts: 72
|
Post by lunchbox on Sept 16, 2009 20:42:58 GMT -5
Thats cool... i should have it for you saturday.
|
|
